The unique tangle free design of the Type 2 General Purpose Tie offers a practical and cost effective solution for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys or a maximum 15m in height.

 

Fully tested to BS EN 846-5: 2012 the ties meet the requirements of BS EN 845-1: 2013. They will also meet the requirements of Part E of the Building Regulations for Type B in external walls.

 

All type 2 cavity wall ties are independently tested at Lucideon, a notified body number 1289, to comply with BS EN 845-1:2013.

UNIQUE DESIGN ADVANTAGES

• Tangle Free
• Supplied in bundles – practical benefits for the bricklayer
• Safety on site
• No Boxes – No packaging waste
• Better Storage particularly during inclement weather

TECHNICAL INFORMATION

SIZE	CAVITY WIDTH	PRODUCT CODE
200mm	50mm to 75mm	DD2 200
225mm	76mm to 100mm	DD2 225
250mm	101mm to 125mm	DD2 250
300mm	101mm to 125mm	DD2 300
275mm	126mm to 150mm	DD2 275
300mm	126mm to 150mm	DD2 300

CLASSIFICATION	FIELD OF USETYPE OF STRUCTURE AND FREQUENCY OF TYING	GEOGRAPHICAL LOCATION
Type 2. (Masonry: General purpose).	Suitable for masonry cavity walls of domestic houses and small,commercial buildings of up to three storeys, i.e. not greater than 15m,in height, comprising two leaves of brick or blockwork of similar,thickness in the range 90mm to 150mm. May be suitable for cavity walls,having leaves of disperate thickness or stiffness or for cladding walls,in high rise buildings, but should only be used in these situations if,shown to be of adequate performance by calculation. Density not less,than 2.5 ties per square metre.	Flat sites where the,basic wind speed is,up to 31m/s at an,altitude no more than,150m above sea level.

LOOK FOR
THE LABEL

TT2 ties are
coded blue